Follow the signal

Every DJ setup is the same shape: sources feed a mixer, and the mixer feeds the speakers.

Beginner6 min readReviewed 17 Nov 2026

Your sources are decks: media players, turntables, or the two virtual decks in software like Audya. Each one feeds its own mixer channel. Inside a channel, audio passes through the same controls in the same order, then joins the other channels at the master output.

  1. 01Trim (or gain) sets how hot the track enters the channel.
  2. 02EQ shapes the high, mid and low frequencies.
  3. 03The channel fader sets how much of that channel reaches the mix.
  4. 04The crossfader blends between the two sides.
  5. 05Master sends the mix to the main speakers; booth sends a separate feed to the DJ's monitor.

The crossfader curve decides how quickly one side fades in as the other fades out. A smooth curve suits long blends; a sharp curve cuts in almost instantly and suits scratching and quick cuts. Brands label and orient the curve control differently, so learn the idea rather than a knob position. In software you can often take a deck off the crossfader entirely: in Mixxx, a deck set to the centre orientation ignores the crossfader [1].

Headphone cueing lets you hear a track before the room does. Press the channel's cue (PFL, pre-fader listen) button and that channel plays in your headphones whatever its fader is doing. A cue-mix knob blends between the cued channel and the master mix, and split cue puts the cue in one ear and the master in the other.

Practice it now

Two decks in your browser. No download, no account.

Open the decks

Sources

  1. [1]DJing with Mixxx (manual 2.5) · Mixxx