Beatmatching

Learn the pitch maths every DJ uses, beatmatch two tracks by ear, and understand exactly what sync does, and when it fails.

Beginner3 lessons · 20 minReviewed 17 Nov 2026
Lesson 016 min

BPM, pitch faders and 6%

Speeding a track up raises its pitch. About 6% is one semitone.

One equal-tempered semitone is a frequency ratio of 2^(1/12), about 1.0595 [1]. So playing a track 5.95% faster raises it by one semitone, while a semitone down is only about -5.61%. The general formula is semitones = 12 × log2(1 + pitch% / 100) [2]. Without key lock, changing speed changes pitch and key [3].

rekordbox tempo ranges, plus WIDE [4]
±6 / 10 / 16
Pitch step at ±6 in rekordbox [4]
0.02%
Speed change for one semitone up [2]
+5.95%
Engine DJ tempo ranges: 4, 8, 10, 20, 50 or 100% [5]
4–100%

Genres live in tempo bands, not single numbers. Ableton's typical ranges are hip-hop 60–100 BPM, house 115–130, techno and trance 120–140, dubstep 135–145 and drum and bass 160–180 [6]. Narrow tempo ranges give finer control; wide ones let you cross genres.

Lesson 028 min

Beatmatching by ear

Match the tempo, line up the beats, then keep correcting.

  1. 01Cue the first beat of a bar on the incoming deck in your headphones.
  2. 02Start it on the downbeat of the playing track.
  3. 03Match tempo with the pitch fader.
  4. 04Line up the beats by briefly speeding up or slowing down with pitch bend, the jog wheel or by dragging the waveform.
  5. 05Keep listening and correcting: a perfect match is nearly impossible [3].

Drift sounds like a double kick drum, and the kick often seems to weaken just before it. Tap pitch bend in the right direction to pull the beats back together [3].

A useful drill: after each correction, listen for 8 to 16 beats before touching anything again, and cover the BPM display so you have to use your ears [7] [8].

Lesson 036 min

Sync follows the grid

Sync is only as good as the beatgrid under it.

Every DJ app ties sync to the beatgrid. They differ in whether sync locks phase (where the beats fall) as well as tempo (how fast they come).

  • rekordbox BEAT SYNC matches both BPM and beat position to the master deck. Fractional quantize values, fractional loops, manual loops with quantize off and reverse play all switch it off [4].
  • Traktor's Beat Sync locks tempo and phase, even through scratches and jumps; Tempo Sync locks tempo only and leaves the phase to you [9] [10].
  • In Mixxx, without quantize, Sync Lock mainly sets the rate sliders. Turn quantize on to align the beats [3].
  • Engine DJ decks follow a sync lead deck [5].

When sync sounds wrong, the grid is usually slightly off, not the analysis mode [11]. Sync locks to the grid, right or wrong, which is why fixing grids (next course) is really a sync lesson.

Sources

  1. [1]Acoustics: pitch · Indiana University CECM
  2. [2]Key lock (glossary) · Mixgraph
  3. [3]DJing with Mixxx (manual 2.4) · Mixxx
  4. [4]rekordbox 7.1.4 operating instructions · AlphaTheta
  5. [5]Engine DJ user guide v4.5.0 · inMusic
  6. [6]Tempo and genre · Ableton Learning Music
  7. [7]How to beatmatch by ear · VirtualDJ
  8. [8]How to beatmatch · Home DJ Studio
  9. [9]Beat matching and sync (Traktor Play guide) · Native Instruments
  10. [10]Traktor Pro manual: global concepts · Native Instruments
  11. [11]Community answer on sync and beatgrids · Pioneer DJ community