Filters and the filter fade

High-pass to bring a track in, low-pass to take one out.

Beginner5 min readReviewed 17 Nov 2026

A high-pass filter strips away the bottom as you turn it up; a low-pass filter takes off the top as you turn it down [1]. On the DJM-900NXS2, FILTER is one of six one-knob Sound Color FX, alongside SPACE, DUB ECHO, SWEEP, NOISE and CRUSH [2].

  1. 01Start the incoming track with its filter turned fully to high-pass, so there's no low end.
  2. 02At the mix point, raise its fader and sweep the filter back to centre.
  3. 03Sweep the outgoing track to full low-pass, then fade it out [3].

Native Instruments recommends the filter fade for busy tracks [3]. If your filter sits on an effects unit, Digital DJ Tips suggests about 30–40% wet/dry [4].

Practice it now

Two decks in your browser. No download, no account.

Open the decks

Sources

  1. [1]Kill EQ (glossary) · Mixgraph
  2. [2]DJM-900NXS2 operating instructions · Pioneer DJ
  3. [3]DJ transitions · Native Instruments
  4. [4]A beginner's guide to DJ effects · Digital DJ Tips