EQ vs isolator

An EQ turns a band down. An isolator removes it.

Beginner6 min readReviewed 17 Nov 2026

Club mixers use 3-band or 4-band channel EQs. On the Pioneer DJM-900NXS2 each band runs from -26 dB to +6 dB in EQ mode, and an EQ/ISOLATOR switch turns that into a full kill [1]. On the 4-band DJM-V10 the outer bands kill fully while the two mids stop at -26 dB [2]. The Allen & Heath Xone:96 publishes its crossover points: low at 180 Hz, high at 3 kHz [3].

Deepest EQ-mode cut on a DJM-900NXS2 [1]
-26 dB
Maximum boost per band [1]
+6 dB
Isolator mode: the band is gone [1]
-∞
Xone:96 low and high crossovers [3]
180 Hz / 3 kHz

An EQ attenuates a band; an isolator removes it [4]. Software varies too: djay's Classic EQ goes from -24 to +6 dB, and its Isolator mode kills fully [5].

Practice it now

Two decks in your browser. No download, no account.

Open the decks

Sources

  1. [1]DJM-900NXS2 operating instructions · Pioneer DJ
  2. [2]DJM-V10 specifications · Pioneer DJ
  3. [3]Xone:96 user guide · Allen & Heath
  4. [4]Isolator (glossary) · Mixgraph
  5. [5]djay settings: sound · Algoriddim